<广告>
中国 (简体中文) | China (Simplified Chinese)
Skip navigation links

在线购买

Please purchase all our products from these authorized dealers only to ensure that you receive full support in Warranty and replacement matters.

AQUAMAP® 100xs

AQUAMAP® 100xs

产品料号 010-01190-00

AQUAMAP® 100xs AQUAMAP® 100xs AQUAMAP® 100xs

10 英寸键盘操控多功能导航仪

  • 键盘操控, 配备10英寸SVGA彩色显示屏
  • 预载世界范围底图
  • 内置 Garmin HD-ID™、CHIRP 声纳并支持 CHIRP ClearVü™ 扫描声纳
  • 内置高灵敏度 10Hz GPS天线
  • 支持所有 Garmin 航海雷达

AQUAMAP 100xs是按键式操作多功能导航仪,配备10英寸SVGA高分辨率显示屏,预载世界范围基础海图。内置CHIRP和HD-ID™声纳和应用CHIRP技术的ClearVü声纳功能,可以灵活选择多种换能器。

航向和位置每秒刷新 10 次

内置高灵敏度 10Hz GPS天线提供每秒10次的位置和航向刷新,使您的移动状态更流畅地显示在屏幕上,并且航点标记和导航更加准确。包含 Garmin GA38 外置GPS/GLONASS信号接收天线。

卓越的声纳功能

AQUAMAP 100xs的内置声纳功能让您可以自由、灵活地选择多种换能器,包括传统、CHIRP和HD-ID/ ClearVü 一体式换能器。或选配 GCV™ 10 外置声纳,实现 CHIRP ClearVü 和 SideVü™ 扫描成像功能。与兼容的 CHIRP 换能器配合使用时,AQUAMAP 100xs可呈现清晰的声纳图像,详细显示垂钓热点、船舶残骸或潜水位置。利用 Garmin CHIRP 技术,您可以在极深的水下区域清晰地分辨目标,并且可以调整到特定频率以探测特定鱼种。水底结构和轮廓更加清晰易见,甚至在快速移动的情况下也能保持同样的清晰度。而且更深水域的信号噪音也能得到抑制,从而可以更及时地了解水下渔情,以便更安全地导航和捕鱼。

通过雷达进行扩展

AQUAMAP 100xs 配备内置雷达端口,可以与价格合理的 GMR™ 航海雷达产品连接使用。无论现在或将来增配雷达,都会享受到即插即用的安装便利性,并享受雷达产品为提升航行安全带来的帮助。

航海网络

AQUAMAP 100xs 提供航海网络功能,允许您与其他兼容的 GPSMAP 航仪共享某些功能,比如雷达、GCV 10扫描声纳、补充地图和用户数据(包括航点、航线和航迹)。输入一个导航仪的用户数据会自动与网络中的其他兼容导航仪同步。

特殊渔猎功能

特殊渔猎功能包括绘制边界线和声纳图像颜色区分功能。

硬件和性能

外观尺寸 35.9 x 23.6 x 7.5 厘米
屏幕尺寸 21.1 x 15.8 厘米
屏幕分辨率 800x600,SVGA
机身重量 2.2公斤
防水等级 IPX7
天线形式 内置高灵敏度GPS、GLONASS接收解码单元,外接天线
外部天线  
安装方式 支架式,嵌入式
罗经安全距离 30 厘米
工作电压 10-32VDC
功率消耗 最大电流3.8A(12VDC)

海图与内存

预置海图 世界范围基础海图
卡槽数量 SD x 2
航点储存数量 12000
航线储存数量 200(每条航线最多250航点)
航迹储存数量 100(每条航迹最多2500航点)

设备支持与兼容

Garmin雷达  
Garmin声纳 (内置模组)
NMEA2000通讯协议  
NMEA0183通讯协议  
Garmin航海网络 (有限)
外部AIS  
DSC功能  
潮汐表  
Garmin Helm APP  

声纳规格

双频双波束  
支持频率 50/77/200 kHz, 中高低频段CHIRP及ClearVü
发射功率 1kW 传统; 1kW CHIRP
CHIRP技术 (模组内置)
ClearVü™ (模组内置)
SideVü™ (需外接GCV™10)
底部锁定  
水温图表  
声纳记录  
声纳回看  

通讯与接口

NMEA0183 输入 2
NMEA0183 输出 2
视频输入  
视频输出  
无线连接  
通讯网口 1(RJ45)
  • AQUAMAP100xs主机
  • 电源/数据线
  • 固定支架与安装附件
  • 屏幕保护盖
  • GPS天线及安装附件
  • 使用手册
 
更新档案下载 
 
 软件授权声明

对于下载、安装或使用本软件,您同意并且接受我们条款的约束,而且确实遵守下列授权声明,请仔细阅读本协议条款。

Garmin Corporation("Garmin")在可适用之产品正常操作下同意您一个有限制且不独占的授权去使用本升级软件程序("本软件"),本软件的标 题、所有权与知识产权依然为Garmin所有,Garmin只允许您个人使用本软件,您也可以自行拷贝起来使用,但仅限于自己个人的使用,假使您同意本条 款,您不须签名认可,本条约依然有其效力。

本软件仅提供软件的升级,并不附带任何的保证或是能符合您所需功能的目的。

本软件的知识产权是属于Garmin,并且被保护于美国著作权法与国际版权协议之下,您必须更进一步的了解,本软件的架构、组织、编码与原始码是属于 Garmin的有价值商业秘密,您同意将不会对本软件作编辑、修改、拆解、还原工程、或其它试图察知原始码之尝试。

您同意不会在违反美国出口控制法律下输出或是再次输出本软件到其它国家。

2018/01/30

Aquamap 100xs software update v3.90

Download下载软件(113 MB)

Aquamap 100xs software update v3.90

Release Note:

  1. Fix hanging problem while Fantom radar connected
  2. Support manual selection for Airmar transdduers
  3. Fix phonetic keyboard issues
  4. Improve coordinate accuracy while adding new waypoint

How to Update the Software?

  1. Click on 'Download' and choose to save the file to your computer.
  2. Choose a location where you can easily find the file, such as the 'My Documents' folder or 'C:\'.
  3. Once the download is complete, go to the location where you saved the file.
  4. Double-click on the downloaded file. This will automatically extract the files to C:\Garmin and run a program to transfer the software update to an SD card.
  5. Power on the device and make sure all attached network devices are powered on as well.
  6. Insert the card into the card slot of your primary device. Select 'Update Software' in the window that automatically displays. If you do not have a primary device with a card slot, please see your dealer.
  7. After the update completes, all Garmin Marine Network devices and NMEA 2000 sensors will have the latest software. This ensures all of the devices will be able to communicate with each other. Note: If you have additional chartplotters connected to NMEA 2000 and not the Garmin Marine Network, you will have to independently update each chartplotter. After the update of the Garmin Marine Network completes, insert the update card into each NMEA 2000 chartplotter.

 

NOTE:

This software should only be uploaded to the unit for which it is intended. If this software is uploaded to a GPS unit other than the product it is designed for, it will render the unit inoperative.
If the software upload fails, and subsequent upload attempts prove unsuccessful, the unit may need to be returned to Garmin for service. Call Garmin at +886.2.26429199 ext2 or email Garmin. You may also contact Garmin authorised dealer for product support.
Before proceeding, please back up your waypoints and route data. You may back up the data by copying the GPX files in the Garmin disk to your computer. This software should only be uploaded to the unit for which it is intended. If this software is uploaded to a GPS unit other than the product it is designed for, it will render the unit inoperative.

 

Change History:

Version 2.20:

  1. Go to the last viewed function after reboot unit.
  2. Not allow using BACK key to get back to home page in Chart, Sonar and Radar pages.
  3. Change Korean font.
  4. Display current position legends while panning the cursor.
  5. Extend AIS/MARPA alarm distance up to 10 miles.
  6. Display legends on "New Route" and "New Boundary" map.
  7. User can hide waypoint symbol on boundary line.
  8. Duplicate duplicate data overlay in overlay number layout settings.
  9. Translation issues.
  10. Increase the waypoints, routes and tracks memory size.
  11. Add Function Mode setting to choose "All", "Sonar Only", and "Radar Only" functions.
  12. Change default chart page as "Navigation Chart".
  13. Add a "Chart Options" in chart menu.
  14. Close the menu window after the setting is applied by "Done" button.
  15. Support keypad handling for English keyboard.
  16. Resize the full screen display window after the menu popup for chart, sonar and Radar page.
  17. Display Gain manual level or Auto word at the display bottom of the left in sonar page.
  18. Combine all radar functions into one offshore mode.
  19. Show Sea Clutter and Rain Clutter information on the left-bottom data window on Radar page.
  20. Adjust the dual range radar menu.
  21. Adjust the vessel position to center in radar overlay.
  22. Add Look Ahead Speed setting in radar overlay menu.
  23. Use the last used waypoint symbol as default when user create the new waypoint.
  24. Bugs fixing.

Version 2.10:

  1. Added Shortcut Key feature.
  2. Supported Sonar Color Rejection.
  3. Supported Dual Range Radar.
  4. Supported Radar MARPA function.
  5. Added Boundary Line feature.

back to top


正在搜索中...