<广告>
跳过导航链接

在线购买

Please purchase all our products from these authorized dealers only to ensure that you receive full support in Warranty and replacement matters.

GPSMAP® 2108 Plus

GPSMAP® 2108 Plus

产品料号 010-01323-02

电商专区

8寸彩屏按键式海图雷达航仪

  • 配备8英寸SVGA彩色显示屏,具有VGA视频输出
  • 预装全球基础底图并支持Garmin BlueChart g2海图
  • 内置高灵敏度GPS / GLONASS /北斗系统接收器
  • 支持Garmin GMR全系列雷达
  • AIS数据可在海图和雷达页面上叠加显示
  • 语言支持:英语,简体中文,日语,泰语,印度尼西亚语,缅甸语

GPSMAP2108 PLUS按键式海图雷达航仪,配备8英寸彩色SVGA显示屏并预装了全球范围基础底图。

1 Hz GPS / GLONASS /北斗系统接收器

1 Hz GPS / GLONASS /北斗系统接收器提供每秒1次的位置和航向更新(航仪需要连接GPS天线)

扩展雷达功能

GPSMAP 2108PLUS带有雷达端口,可与Garmin GMR™系列船用雷达配合使用(雷达单独出售)。无论是现在还是将来添加雷达,都可享受即插即用便利安装方式,体验雷达产品带来各种量程下的高清目标图像。

联网功能

GPSMAP2108 PLUS提供了有限的联网功能。可以与其他兼容设备共享功能,例如雷达,地图卡内容以及用户数据,包括航路点,路线和航迹。

支持雷达功能

支持GMR xHD雷达,双程雷达,雷达尾迹功能,MARPA,带刻度的量程距标圈,支持EBL / VRM亮度调节,雷达数据叠加显示。

双量程操作 高性能圆盘雷达如xHD横杆雷达表现
动态自动增益和海浪抑制调节 雷达数据叠加显示

硬件和性能

外观尺寸 28.5 x 17.2 x 9.3 厘米
屏幕尺寸 16.2 x 12.1 厘米
屏幕分辨率 800x600 像素
屏幕类型 SVGA
机身重量 1.4公斤
防水等级 IPX7
天线接收器 内置高灵敏度1Hz接收器
天线形式 外部连接BNC天线
安装方式 支架式,嵌入式
工作电压 10-32VDC
功率消耗 最大功耗@10VDC:14WA
典型电流值@12VDC:1.1A
最大电流@12VDC:3.2A

海图与内存

预置海图 世界范围基础海图
卡槽数量 SD x 1
航点储存数量 12000
航线储存数量 200(每条航线最多250航点)
航迹储存数量 100(每条航迹最多2500航点)

设备支持与兼容

Garmin雷达  
Garmin声纳  
NMEA2000通讯协议  
NMEA0183通讯协议  
Garmin航海网络 (有限)
兼容GARMIN SMARTMODE(自定义预设功能)  
支持AIS (NMEA0183)
支持DSC (NMEA0183)
潮汐表  
支持GSD™外置声纳  
支持GCV™外置声纳  
兼容BLUECHART® MOBILE  
兼容GARMIN HELM  
兼容GRID™  
兼容无线遥控  
兼容无线鼠标  

通讯与接口

NMEA0183 输入 2
NMEA0183 输出 2
视频输入  
视频输出 (D-Sub)
无线连接  
Garmin航海网络端口 1(RJ45)
  • GPSMAP2108PLUS
  • 电源/数据线
  • 固定支架
  • 保护盖
  • 使用说明与安装手册
 
更新档案下载 
 
 软件授权声明

对于下载、安装或使用本软件,您同意并且接受我们条款的约束,而且确实遵守下列授权声明,请仔细阅读本协议条款。

Garmin Corporation("Garmin")在可适用之产品正常操作下同意您一个有限制且不独占的授权去使用本升级软件程序("本软件"),本软件的标 题、所有权与知识产权依然为Garmin所有,Garmin只允许您个人使用本软件,您也可以自行拷贝起来使用,但仅限于自己个人的使用,假使您同意本条 款,您不须签名认可,本条约依然有其效力。

本软件仅提供软件的升级,并不附带任何的保证或是能符合您所需功能的目的。

本软件的知识产权是属于Garmin,并且被保护于美国著作权法与国际版权协议之下,您必须更进一步的了解,本软件的架构、组织、编码与原始码是属于 Garmin的有价值商业秘密,您同意将不会对本软件作编辑、修改、拆解、还原工程、或其它试图察知原始码之尝试。

您同意不会在违反美国出口控制法律下输出或是再次输出本软件到其它国家。

2019/06/29

GPSMAP2108 Plus v3.00

Download下载软件(19.6 MB)
2019/01/09

GPS Software Update

Download下载软件(542 KB)

GPSMAP2108 Plus v3.00

Release Note:

  1. Add support for the ZDA sentence

 

How to Update the Software?

  1. Click on 'Download' and choose to save the file to your computer.
  2. Choose a location where you can easily find the file, such as the 'My Documents' folder or 'C:\'.
  3. Once the download is complete, go to the location where you saved the file.
  4. Double-click on the downloaded file. This will automatically extract the files to C:\Garmin and run a program to transfer the software update to an SD card.
  5. Power on the device and make sure all attached network devices are powered on as well.
  6. Insert the card into the card slot of your primary device. Select 'Update Software' in the window that automatically displays. If you do not have a primary device with a card slot, please see your dealer.
  7. After the update completes, all Garmin Marine Network devices and NMEA 2000 sensors will have the latest software. This ensures all of the devices will be able to communicate with each other. Note: If you have additional chartplotters connected to NMEA 2000 and not the Garmin Marine Network, you will have to independently update each chartplotter. After the update of the Garmin Marine Network completes, insert the update card into each NMEA 2000 chartplotter.

 

NOTE:

This software should only be uploaded to the unit for which it is intended. If this software is uploaded to a GPS unit other than the product it is designed for, it will render the unit inoperative.
If the software upload fails, and subsequent upload attempts prove unsuccessful, the unit may need to be returned to Garmin for service. Call Garmin at +886.2.26429199 ext2 or email Garmin. You may also contact Garmin authorised dealer for product support.
Before proceeding, please back up your waypoints and route data. You may back up the data by copying the GPX files in the Garmin disk to your computer. This software should only be uploaded to the unit for which it is intended. If this software is uploaded to a GPS unit other than the product it is designed for, it will render the unit inoperative.

 

Change History:

Version 2.20:

  1. Go to the last viewed function after reboot unit.
  2. Not allow using BACK key to get back to home page in Chart, Sonar and Radar pages.
  3. Change Korean font.
  4. Display current position legends while panning the cursor.
  5. Extend AIS/MARPA alarm distance up to 10 miles.
  6. Display legends on "New Route" and "New Boundary" map.
  7. User can hide waypoint symbol on boundary line.
  8. Duplicate duplicate data overlay in overlay number layout settings.
  9. Translation issues.
  10. Increase the waypoints, routes and tracks memory size.
  11. Add Function Mode setting to choose "All", "Sonar Only", and "Radar Only" functions.
  12. Change default chart page as "Navigation Chart".
  13. Add a "Chart Options" in chart menu.
  14. Close the menu window after the setting is applied by "Done" button.
  15. Support keypad handling for English keyboard.
  16. Resize the full screen display window after the menu popup for chart, sonar and Radar page.
  17. Display Gain manual level or Auto word at the display bottom of the left in sonar page.
  18. Combine all radar functions into one offshore mode.
  19. Show Sea Clutter and Rain Clutter information on the left-bottom data window on Radar page.
  20. Adjust the dual range radar menu.
  21. Adjust the vessel position to center in radar overlay.
  22. Add Look Ahead Speed setting in radar overlay menu.
  23. Use the last used waypoint symbol as default when user create the new waypoint.
  24. Bugs fixing.

Version 2.10:

  1. Added Shortcut Key feature.
  2. Supported Sonar Color Rejection.
  3. Supported Dual Range Radar.
  4. Supported Radar MARPA function.
  5. Added Boundary Line feature.

back to top

GPS Software Update

Installation Instructions:

  1. Copy "gps_fw.bin" file under Garmin\RemoteSW folder on SD card.
  2. Insert the SD card into the unit, select “Update GPS Software” to activate the GPS software update.

back to top


正在搜索中...